ALTERNATIVE TO PVR THAT ALLOWS FNA OF TRUNK CALL

Summary

• Every trunk must be in its own route – in other words one route for every trunk that would have been a PVR.
• The trunk routes must be set to AUTO=YES – for Auto Terminate
• In order to define a KEY on a phone so that it appears as if it is the trunk, the HOT feature is used to dial the trunks route access code.

Create the Route LD16

>ld 16
REQ  new
TYPE rdb
CUST 0
ROUT 101 (variable as desired)
DES 5551212 (variable as desired)
TKTP cot
AUTO yes
ICOG iao
ACOD 5551212 (consider the last 4 or all 7 digits of trunk tel. number)
TARG 0

Assigning a KEY for the trunk on the telephone LD11

KEY 0 hot d 7 5551212 1212 h  (h = incoming calls ring)

or

KEY 0 hot d 7 5551212 1212 n  (n = incoming calls do not ring) 

• "7" is the number of digits trunk route access code (ACCD)

• "5551212" is the trunk route access code (ACCD)

• "1212" is the DN of the KEY (same as trunk ATDN below)

Build the trunk LD14

LD14
REQ new
TYPE cot
TN   28 0 1 7
DES  5551212 (variable as desired)
CUST 0
RTMB 101 1
ATDN 1212
SIGL lop
CLS  dtn